[DeTomaso] 2 steps forward, 2 steps back

[GW]

I've deffinantly seen better looking. I have the adjustment to get it 
slightly positive but not where I wanted it to be. But then again that 
was the idea behind the jig; if it ain't right, build a different one.



larry at ohiotimecorp.com wrote:
> <<I measured 2x but corrected caster the wrong direction>>
>
> Maybe you could just drive more in reverse?
>
> Larry (Corrigan) - Cleveland
>
>
>
>
> On Tue Apr 26 21:39 , GW  sent:
>
>   
>> I finished my first A-Arm today. The jig was built with the original 
>> a-arm as setting zero. The jig allows the ball joint to move to the 
>> desired position then you build the a-arm. It worked great.....except I 
>> am not Jesus. I measured 2x but corrected caster the wrong direction.
>>
>> It was however a good exercise. It will give me some ideas of other ways 
>> to construct the arms. 1.25" tubing .125" for an upper arm is quite 
>> beefy; a little overkill.
>>
>> http://www.rc-tech.net/pantera1/jig/jig.htm
>>
>> Good exercise none the less...
>>
>>
>> Gary
>>
>> _______________________________________________
>>
>> Detomaso Forum Managed by POCA
>>
>> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>>
>> DeTomaso mailing list
>> DeTomaso at list.realbig.com
>> http://list.realbig.com/mailman/listinfo/detomaso
>>     
>
>
>
>