[DeTomaso] 2 steps forward, 2 steps back
larry at ohiotimecorp.com
larry at ohiotimecorp.com
Tue Apr 26 21:04:43 EDT 2011
<<I measured 2x but corrected caster the wrong direction>>
Maybe you could just drive more in reverse?
Larry (Corrigan) - Cleveland
On Tue Apr 26 21:39 , GW sent:
>I finished my first A-Arm today. The jig was built with the original
>a-arm as setting zero. The jig allows the ball joint to move to the
>desired position then you build the a-arm. It worked great.....except I
>am not Jesus. I measured 2x but corrected caster the wrong direction.
>
>It was however a good exercise. It will give me some ideas of other ways
>to construct the arms. 1.25" tubing .125" for an upper arm is quite
>beefy; a little overkill.
>
>http://www.rc-tech.net/pantera1/jig/jig.htm
>
>Good exercise none the less...
>
>
>Gary
>
>_______________________________________________
>
>Detomaso Forum Managed by POCA
>
>Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
>DeTomaso mailing list
>DeTomaso at list.realbig.com
>http://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list