[DeTomaso] OK, now what did I screw up?

[Charles McCall]

Metering block removed as well (it sort of comes out anyway if you remove
the bowls). Soaked overnight and blown clean with neighbor's air.

 

But that's not why my car won't run at more than half throttle.

 

Charles McCall

1985 DeTomaso Pantera GT5-S #9375

"Raising Pantera Awareness Across Europe"

 <http://www.poca.com/index.php/gallery/?g2_itemId=2323>
http://www.poca.com/index.php/gallery/?g2_itemId=2323

  _____  

De: MikeLDrew at aol.com [mailto:MikeLDrew at aol.com] 
Enviado el: domingo, 17 de abril de 2011 19:44
Para: charlesmccall at gmail.com; detomaso at realbig.com
Asunto: Re: [DeTomaso] OK, now what did I screw up?

 


In a message dated 4/17/11 10 40 7, charlesmccall at gmail.com writes:





I removed the floats and cleaned out the bowls. I cleaned up everything the
best I could and re-assembled.



Did you remove the metering blocks, and clean out all the gick that can get
in there too?  If all you did was remove the float bowls and wipe them down,
you haven't done anything of substance.

You're supposed to be soaking your carb in carb cleaner, blowing it out with
compressed air, etc. etc.

There are no shortcuts here!

Mike