[DeTomaso] [SCPOCA] Molding clay

[Tomas Gunnarsson]

A friend works at a body shop where I've used such an induction heater. I
was surprised how well it worked and really liked it.

Tomas

-----Original Message-----
From: detomaso-bounces at realbig.com
[mailto:detomaso-bounces at realbig.com]On Behalf Of Larry - Ohio Time Corp
Sent: den 15 april 2011 17:28
To: 'Bill Lewis'; detomaso at realbig.com; scpoca at yahoogroups.com
Subject: Re: [DeTomaso] [SCPOCA] Molding clay


Hi Bill,

Yes it is ATF and not brake fluid in that mix. You can make you "Dam" out of
silicone caulking if the plumbers putty does not work with the ATF mix.

You may want to hit it with a hammer during the soaking time to loosen
things up.

I have always found heat to unstuck (or melt) bolts off. A TIG torch is a
nice small way to heat things up. There is also a new "induction" heating
tool out there.

http://www.denlorstools.com/home/dt1/page_11348_48/otc_magnetic_induction_he
ating_system_otc6650.html

"Finched"

http://tinyurl.com/67yy87k



Larry (don't have one yet) - Cleveland


-----Original Message-----
From: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com] On
Behalf Of Bill Lewis
Sent: Friday, April 15, 2011 10:36 AM
To: detomaso at realbig.com; scpoca at yahoogroups.com
Subject: Re: [DeTomaso] [SCPOCA] Molding clay


Kirby:   I tried making the modeling clay dam - three times - it leaked out.
Everyone:  I have a bolt that will not break loose.  It is an iron (?) bolt
in an aluminum manifold.  Kirby said to build a dam around the site and fill
it with half acetone and half brake fluid, and let it set for several days.
I tried that three times and apparently the clay did not stick/adhere to the
thermostat housing and the fluid leaked out.  On the third time I made the
dam real small and really tried to stick it on good, but it still leaked.
Anyone have any ideas?
(Sorry about the bear )   ---Bill






Animals that were formerly self-sufficient are now showing signs of
belonging to the Democrat Party..... as they have apparently learned to just
sit on their butts and wait for the government to step in and provide for
their care and sustenance.

This photo is of a Democrat black bear in  Montana nicknamed.:

Bearack Obearma

--
Barbara Blackwell
Associate Broker
Prudential Santa Fe Real Estate
314 S. Guadalupe
Santa Fe, NM  87501
(505) 690-9831
(505 988-7443 - fax





    __._,_.___







	  Reply to sender |

	  Reply to group |
        	  Reply via web post |
            	Start a New Topic


                Messages in this topic
          (1)







      Recent Activity:



      New Photos
      1




    Visit Your Group






  Switch to: Text-Only, Daily Digest . Unsubscribe . Terms of Use



















  .





__,_._,___







_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso

_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1209 / Virus Database: 1500/3573 - Release Date: 04/14/11