[DeTomaso] Motive Bleeder System

[boyd casey]

I have both. I like the motive for doing the clutch because the motive cap
fits the clutch master cylinder well. ( I might like it more for the brakes
if I had a cap that fit my brake master cylinder correctly. I have two
different vacum bleeders for the brakes , one is a cheap Harbor Freight unit
and the other was more expensive and came with many more fittings and a
better quality pump. It works quite well. I have found that using any of the
units is made easier and more effective by also using a speed bleeder with
prevents air from being sucked back into the system.
Boyd

On Wed, Apr 6, 2011 at 5:59 PM, GW <gow2 at rc-tech.net> wrote:

> I use a tank and a vacuum pump. It is a dedicated system. The pump is
> connected to the tank unlike the photo which shoes it separate:
>
> http://www.rc-tech.net/MGB/brakes/bleed1.jpg
> http://www.rc-tech.net/MGB/brakes/bleed2.jpg
>
> HF has a cheap vacuum pump. I always thought that may work for this.
>
> Gary
>
>
>
> Will Demelo wrote:
> > I should have posted before I bought but..... Has anyone had good luck
> with the “Motive” pressure bleeder system? Or should I have gone with the
> vacuum type?
> > Will
> > _______________________________________________
> >
> > Detomaso Forum Managed by POCA
> >
> > Archive Search Engine Now Available at http://www.realbig.com/detomaso/
> >
> > DeTomaso mailing list
> > DeTomaso at list.realbig.com
> > http://list.realbig.com/mailman/listinfo/detomaso
> >
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>