[DeTomaso] GT5/5S brake calipers
JDeRyke at aol.com
JDeRyke at aol.com
Sun Apr 3 14:36:46 EDT 2011
IMHO -A- the GT-5 uses wider rotors than a std. Pantera, so both caliper
and rotor would be needed to adapt to a std Pantera. -B- when I installed a
Gr-3 brake system (same calipers & rotors as GT-5) on one std car in the '80s,
both uprights were included in the rather pricey factory kit. So whether
the bolt pattern fits the original uprights without adapters is unknown. But
those heavy iron 3-piston calipers are not particularly desirable except when
running vintage racing events with very strict rules on what parts are
allowed. There are much lighter, cheaper calipers available that do the same (or
better) job. However, the wide rotors are desirable if you run 15" wheels
and do frequent long track events. Thinner rotors- ventillated or not- will
warp under the same useage. Good luck- J DeRyke
More information about the DeTomaso
mailing list