[DeTomaso] Help needed! Metric Harness Eyebolts 11mm X 1.25 pitch

[JDeRyke at aol.com]

In a message dated 4/2/11 3:09:28 PM, thomas at hax.se writes:

> I believe they are 7/16-20 (UNF) thread, not M11. The same thread as the 
> half shaft bolts.
> 

.... and if they are, as Thomas posted, 7/16-20 SAE threads will almost 
exactly match. There are several other places on the Pantera where this occurs 
and the metric & SAE interchange-such as the tie rod ends. Use a little 
thread lube. Good luck- J Deryke