[DeTomaso] Caliper bolts--when was the last time you checked?

Ken Green kenn_green at yahoo.com
Sun Sep 26 23:52:12 EDT 2010






I wonder if that assumes you have the metal tabs also?  With the potential heat cycling, it seems like some form of hi temp locktite (if there is such a thing) or safety wire would be a good thing.
 
Ken

--- On Sun, 9/26/10, doug351c <doug351c at gmail.com> wrote:


From: doug351c <doug351c at gmail.com>
Subject: Re: [DeTomaso] Caliper bolts--when was the last time you checked?
To: "dickruzzindesign" <dickruzzindesign at aol.com>, MikeLDrew at aol.com, detomaso at realbig.com
Cc: "DeTomaso Forum" <detomaso at realbig.com>
Date: Sunday, September 26, 2010, 5:52 PM


Dick,
Front Brake Caliper to Spindle Bolt : 50-55 ft-lbs

Rear Brake Caliper to Upright Bolt : 35-40 ft-lbs

Doug Braun
blue 73L #5505

  -----Original Message-----
  From: dickruzzindesign [mailto:dickruzzindesign at aol.com]
  Sent: Sunday, September 26, 2010 2:14 PM
  To: doug351c at gmail.com; MikeLDrew at aol.com; detomaso at realbig.com
  Subject: Re: [DeTomaso] Caliper bolts--when was the last time you checked?


  Mike,
  What is the recommended torque value for the caliper bolts?
  --

  All the best,
  DICK RUZZIN
  _____________________________________________________________________
  dickruzzinDESIGN at aol.com / Home: 313-824-0539 / Cell: 313-300-9558

_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso



More information about the DeTomaso mailing list