[DeTomaso] Wheel well/house coatings

[Jim Hendrickson]

Make sure that you clean and degrease the surfaces and the rough up the
surface so the bedliner will stick to it. Surface prep is everything. I
think Colorliner is one of the better ones. I had the wife's truck done with
ColorLiner 7 years ago and it is not bubbling or peeling yet.



-----Original Message-----
From: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com] On
Behalf Of Tom Borcich
Sent: Saturday, September 25, 2010 1:30 PM
To: Pantera REALBIG forum
Subject: [DeTomaso] Wheel well/house coatings


I'm cleaning up my wheel well areas, doing the rust/drain holes, relocating
the AC tubes & wires for tail lights to the wheel well area, so I will be
re-coat the entire wheel well area with undercoating spray. Is there an OK,
good, and great brand of undercoating?  Might as well use the good stuff.  

Or, is there a better coating such as truck bed liner that can be sprayed
on?  I have about 80% of the old undercoating removed from the wheel
house/frame support area down to bare metal on the wheel well side, so if
there us a better way to go please give me your recommendations.

Thanks,
 
Tom
 		 	   		  
_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso