[DeTomaso] Now, that was easy! AC Hoses
Garth Rodericks
garth_rodericks at yahoo.com
Fri Sep 24 16:32:15 EDT 2010
No. There's a structure ridge/channel in there that the hoses sit atop. It
serves as a shield to protect them.
________________________________
From: Ken Green <kenn_green at yahoo.com>
To: Rob Dumoulin <rob at dumoulins.net>; DeTomaso Mail List <detomaso at realbig.com>;
Garth Rodericks <garth_rodericks at yahoo.com>
Sent: Fri, September 24, 2010 12:40:24 PM
Subject: Re: [DeTomaso] Now, that was easy! AC Hoses
Does anyone worry about rocks etc. being thrown up in the wheels wells and
damaging AC hoses or wiring?
Ken
--- On Fri, 9/24/10, Garth Rodericks <garth_rodericks at yahoo.com> wrote:
>From: Garth Rodericks <garth_rodericks at yahoo.com>
>Subject: [DeTomaso] Now, that was easy!
>To: "Rob Dumoulin" <rob at dumoulins.net>, "DeTomaso Mail List"
><detomaso at realbig.com>
>Date: Friday, September 24, 2010, 11:53 AM
>
>
>I just did that a few weeks ago on my car. I also removed the steel tabs that
>held the wiring harness and the ac hoses as they're also routed behind the
>fender.
>
>
>
>
>--- Original Message ---
>
>Possibly one of the easiest cosmetic alterations I've done was to relocate the
>wiring harness that runs inside passenger side of the back trunk to the wheel
>well. For those who, like me, wondered why Detomaso didn't do that in the first
>
>place, I suggest you spend an hour doing the relocation yourself. Forgive me if
>
>this is widely known, but I didn't know it. Simply unplug the connector near
>the coolant tanks, write down the wiring order that goes into the connector, use
>
>a jewler's screwdriver to compress the clips from the front of the plug, and
>simply pull the wire & wire connector out of the bulky white plug that is too
>big to fit through the fender hole. With the wires free, feed them through the
>
>fender hole where rear running light goes out. The wire is long enough to run
>along the top of the frame rail in the wheel well. Simply put the wires back
>into the white plug, hook it back up, and put some fasteners to keep the wire in
>
>place on the frame rail. Why didn't they do this to begin with? -- Rob
>DuMoulin
>
>
>
>_______________________________________________
>
>Detomaso Forum Managed by POCA
>
>Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
>DeTomaso mailing list
>DeTomaso at list.realbig.com
>http://list.realbig.com/mailman/listinfo/detomaso
>
More information about the DeTomaso
mailing list