[DeTomaso] Now, that was easy!
Asa Jay Laughton
asajay at asajay.com
Fri Sep 24 10:00:18 EDT 2010
I believe that's the way mine came from the factory:
http://www.teampanteraracing.com/index.php?option=com_g2bridge&view=gallery&Itemid=57&g2_itemId=371
Asa Jay
Asa Jay Laughton, MSgt, USAFR, Retired
& Shelley Marie
Spokane, WA
******************************
http://www.racingagainstautism.com
http://www.teampanteraracing.com
On 9/24/2010 05:48, Rob Dumoulin wrote:
> Possibly one of the easiest cosmetic alterations I've done was to relocate
> the wiring harness that runs inside passenger side of the back trunk to the
> wheel well. For those who, like me, wondered why Detomaso didn't do that in
> the first place, I suggest you spend an hour doing the relocation yourself.
> Forgive me if this is widely known, but I didn't know it.
>
> Simply unplug the connector near the coolant tanks, write down the wiring
> order that goes into the connector, use a jewler's screwdriver to compress
> the clips from the front of the plug, and simply pull the wire& wire
> connector out of the bulky white plug that is too big to fit through the
> fender hole. With the wires free, feed them through the fender hole where
> rear running light goes out. The wire is long enough to run along the top
> of the frame rail in the wheel well. Simply put the wires back into the
> white plug, hook it back up, and put some fasteners to keep the wire in
> place on the frame rail.
>
> Why didn't they do this to begin with?
>
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 9.0.856 / Virus Database: 271.1.1/3155 - Release Date: 09/23/10 11:34:00
>
More information about the DeTomaso
mailing list