[DeTomaso] Pantera Wheel Specs?

[boyd casey]

It is possible to get brembo templates to fit the calipers to the wheels. I
have a set of the templates for the Brembo 911 Turbo calipers if someone
wants them ( I just have to look for them. My wheels were not made
Hubcentric. It wasn't a question of fit it was a question of construction
technique. I can get mine converted to hub centric (as opposed to lug
centric)

On Fri, Sep 17, 2010 at 3:56 PM, Paul - Home <thedrol at pobox.com> wrote:

> Just to complicate matters, back in the day I bought a set of Kinesis K5
> wheels.  They had to have the mounting face side of each lug hole
> chamfered in order to clear the little bit of the wide part of the stud
> that came through the rotor.
>
> Paul
> #9270
>
> On 9/17/2010 2:45 PM, Ken Green wrote:
> > I know that there have been a lot of posts regarding wheel fitment.  Is
> there an accepted set of Pantera wheel specs posted anywhere?  In addition
> to width and offset specs, I have run into a couple instances where big
> aftermarket wheels don't clear big calipers, and people (e.g., Boyd) bought
> wheels that didn't center on the hubs.  We could avoid all this with a good
> set of specs.  Can anyone suggest a starting point?
> >
> > We really need drawings as part of the specs to show exactly what each
> dimension means.
> >
> > Ken
> > _______________________________________________
> >
> > Detomaso Forum Managed by POCA
> >
> > Archive Search Engine Now Available at http://www.realbig.com/detomaso/
> >
> > DeTomaso mailing list
> > DeTomaso at list.realbig.com
> > http://list.realbig.com/mailman/listinfo/detomaso
> >
> >
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>