[DeTomaso] detomaso harness bar

[gow2 at rc-tech.net]

Mine is in the cab not the back. I looked long and hard about behind the
bulkhead but that was a real tough place to put it. I bent the main hoop
and actually tried to get it in the back and was unable to maneuver it
back there with an empty shell.

On top of that it was going to require a reduced tank volume. I am already
building a fuel tank for the right side which is substantially different
from stock to accomodate the headers which send all 4 primaries to the
back colecting behind the suspension. That header system compromised my
volume a little and I did not want to cut it down any more.

Cab mount roll bar is far more removable and leaves more room in engine
bay for some custome things I am doing such as the oil cooler ducted from
the air vent.

http://www.rc-tech.net/pantera1/rollbar/roll.htm

http://www.rc-tech.net/pantera1/index.htm

Gary