[DeTomaso] Squeaky clutch linkage or master?
detomasoregistry at gmail.com
detomasoregistry at gmail.com
Wed Sep 15 19:15:39 EDT 2010
For diagrams, photos, and even a video of the linkage see:
http://www.provamo.com/Members/TechInfo/ClutchEffortReductionKit.asp
If the link found here is the video I think it is, the pedal was hand-pushed, and it even
squeaks!
Chuck
-----Original Message-----
From: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com] On Behalf Of
JDeRyke at aol.com
Sent: Wednesday, September 15, 2010 3:54 PM
To: daniel.c.jones2 at gmail.com; detomaso at realbig.com
Subject: Re: [DeTomaso] Squeaky clutch linkage or master?
In a message dated 9/15/10 9:45:37 AM, daniel.c.jones2 at gmail.com writes:
> Any recommendations on lubricant. I've got some tri-flow which I use on
> bicycle chains but it seems pretty light for this application.
>
Even a big guy like you won't be putting much more than 50-75 lbs of leg
pressure on the pedal, so an extreme pressure lube ought to last OK- like 80W
90. Or chain lube also-and some of them are foaming which carries the goodie
into the joints better. FWIW, the pivot pins and links in the overcenter
linkage is all mild steel so expect some wear & slop. Sometimes this makes a
squeek. I substituted pieces of hardened pushrods for the stock pins. Good
luck- J Deryke
_______________________________________________
Detomaso Forum Managed by POCA
Archive Search Engine Now Available at http://www.realbig.com/detomaso/
DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list