[DeTomaso] BOSS 302 manifold on eBay
Ken Green
kenn_green at yahoo.com
Mon Sep 13 13:11:42 EDT 2010
Dan,
I was looking at the photo of the head flange. The bolt holes are all nearly vertically centered on the runners. I thought that all the high port heads have the bolt holes closer to the floors of the runners? It looks like something that would match a 4V head, not a raised port head.
http://cgi.ebay.com/ebaymotors/Ford-302-Aluminum-Intake-Manifold-351C-Heads-/360300195439
The same seller has Weiand tunnel ram that has the same characterists.
http://cgi.ebay.com/ebaymotors/Ford-302-Weiand-Aluminum-Intake-Manifold-351C-Heads-/360298450951
Just something I haven't seen before.
Ken
Ken
--- On Mon, 9/13/10, Daniel C Jones <daniel.c.jones2 at gmail.com> wrote:
From: Daniel C Jones <daniel.c.jones2 at gmail.com>
Subject: Re: [DeTomaso] BOSS 302 manifold on eBay
To: "Pantera REALBIG forum" <detomaso at realbig.com>
Date: Monday, September 13, 2010, 9:49 AM
> It has water passages where the passages are for BOSS 302 heads
Ford Motorsport high port heads were designed for for either
Windsor or Cleveland water routing. Some high port intakes
were designed for Windsors, some for Clevelands and others
were designed for either.
> and looks like it is not for raised ports.
Why do you say that? The seller says it has ports that are
2 1/16" high by 1 7/16" wide. A Boss 302 has a 2.5" tall by
1 3/4" wide intake port. When attempting to mount a high port
intake on an engine with 4V heads, the lower floor of the 4V
head is typically exposed. It appears to me to be a high port
intake that has been widened to perhaps match a ported set of
C302B or C3 heads and has been milled.
Dan Jones
On Mon, Sep 13, 2010 at 11:31 AM, Ken Green <kenn_green at yahoo.com> wrote:
> Dan,
>
> It has water passages where the passages are for BOSS 302 heads and
> looks like it is not for raised ports. I assumed that made it a BOSS 302
> manifold?
>
> Ken
>
> --- On *Mon, 9/13/10, Daniel C Jones <daniel.c.jones2 at gmail.com>* wrote:
>
>
> From: Daniel C Jones <daniel.c.jones2 at gmail.com>
> Subject: Re: [DeTomaso] BOSS 302 manifold on eBay
> To: "Pantera REALBIG forum" <detomaso at realbig.com>
> Date: Monday, September 13, 2010, 9:07 AM
>
> > Seems like a fairly rare manifold:
>
> That appears to be a Ford Motorsport M-9424-B302 intake manifold
> for C302 or C3L (there were two different versions) on a 8.2"
> deck SBF block. It might not seal against 4V heads and appears
> to have been milled a fair bit.
>
> Dan Jones
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com<http://us.mc308.mail.yahoo.com/mc/compose?to=DeTomaso@list.realbig.com>
> http://list.realbig.com/mailman/listinfo/detomaso
>
>
_______________________________________________
Detomaso Forum Managed by POCA
Archive Search Engine Now Available at http://www.realbig.com/detomaso/
DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list