[DeTomaso] what clutches that work with the ZF?
Mike Thomas
mbefthomas at comcast.net
Mon Sep 6 20:26:39 EDT 2010
>From my archives:
Centerforce: Flywheel #700250-48 Clutch Disc & Pressure plate
#DF021057S Fits transmission input shaft with 1 1/16 dia. and 10 splines
(Ford size).
ZF input shaft splines:
-1 is 1 1/8 by 10 (Chevy size)
-2 is 1 1/16 by 10 (Ford Size)
(per) SOBill Taylor
sobill at aol.com
(email of 11/12/06)
-----Original Message-----
From: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com] On
Behalf Of mikeldrew at aol.com
Sent: Monday, September 06, 2010 3:04 PM
To: kenn_green at yahoo.com; detomaso at realbig.com
Subject: Re: [DeTomaso] what clutches that work with the ZF?
Ken,
You wrote:
So, if you have part numbers, please share them.
>>>I don't have the part numbers handy. I sure wish McLeod hadn't
removed that page from their website, as it has them all.
I have specifically (personally) had great luck with their
three-finger and diaphragmn pressure plates, and their dual-friction
clutch disc. I've also had luck with Centerforce's pressure plate and
dual friction clutch disc. I know the Centerforce numbers are in the
archives somewhere, and I think I published the McLeod numbers here a
few years ago.
Mike
_______________________________________________
Detomaso Forum Managed by POCA
Archive Search Engine Now Available at http://www.realbig.com/detomaso/
DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list