[DeTomaso] Fw: what clutches that work with the ZF?
Will Demelo
wdemelo at cogeco.ca
Fri Sep 3 20:47:26 EDT 2010
The Mcleod website shows a Pantera pressure plate as
360505 De Tomaso Pantera 1970-1991 1.875 @ .300 1600 # 3 3/8 Yes 11"
$260.00
This is indicated as an 11". My disk is a 10.5", though.
Will
----- Original Message -----
From: "Will Demelo" <wdemelo at cogeco.ca>
To: "Ken Green" <kenn_green at yahoo.com>; <detomaso at realbig.com>
Sent: Friday, September 03, 2010 8:37 PM
Subject: Re: [DeTomaso] what clutches that work with the ZF?
> This is what I know....
> I currently have this..
> http://www.pim.net/90203clutch1.jpg
> This is a 10 1/2" 3-finger pressure plate with dual friction disk. The
> part # on the Mcleod box was 260830. It currently supports a 500+ stroker.
> I put it in after smoking 2 of the
> Centerforce D21057S set-ups.This is a diaphram style pressure plate.
> Centerforce told me that it only supports 500 ft/lb torque (@ flywheel). I
> apparently didn't follow the proper breakin procedure of 500 miles
> (bulls**t).
> A stronger Pantera specific Centerforce set-up, according to the tech I
> spoke to, is the DF920830. This is rated at 620 ft/lbs.
> I am very happy with the Mcleod I have in there now, although I haven't
> launched it at the dragstrip, which is the true test.
> Will
> ----- Original Message -----
> From: "Ken Green" <kenn_green at yahoo.com>
> To: <detomaso at realbig.com>
> Sent: Friday, September 03, 2010 3:17 PM
> Subject: [DeTomaso] what clutches that work with the ZF?
>
>
>>I called McLeod yesterday and asked about using their 11 inch diaphragm
>>Mustang clutch in the Pantera and they responded that you have to use the
>>11 inch Long style clutch which is Pantera specific. My guess is that this
>>specific pressure plate does not have the weights that can come out and
>>hit the inside of the bell housing, but I'm not sure I believe that you
>>can't use the Mustang 11 inch diaphragm pressure plate, and on a previous
>>visit to McLeod, another tech there recommended the 11 inch diaphragm pr
>> essure plate. I also know at least one Pantera owner using the McLeod
>> dual disk clutch with no issues.
>>
>> Based on this, can we put together a list of clutches (disks and pressure
>> plates) that are known to work in a Pantera from actual experience?
>>
>> Ken
>>
>>
>> _______________________________________________
>>
>> Detomaso Forum Managed by POCA
>>
>> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>>
>> DeTomaso mailing list
>> DeTomaso at list.realbig.com
>> http://list.realbig.com/mailman/listinfo/detomaso
>
More information about the DeTomaso
mailing list