[DeTomaso] speedo drive

[Tomas Gunnarsson]

Mark,
 
Are you trying to source it from somewhere? IIRC it's super special with
one end threaded left hand and the other end threaded right hand.
Probably very hard to find away from a Pantera vendor or Butfoy.
 
Tomas

<-----Ursprungligt Meddelande----->
From: mark skwarek [ehpantera at yahoo.com]
Sent: 18/10/2010 6:40:03 AM
To: detomaso at realbig.com; JDeRyke at aol.com
Subject: Re: [DeTomaso] speedo drive

I was talking about the locking nut between the right angle drive and
the ZF.  Not the cable.
 
Thanks,
Mark

--- On Sun, 10/17/10, JDeRyke at aol.com <JDeRyke at aol.com> wrote:


From: JDeRyke at aol.com <JDeRyke at aol.com>
Subject: Re: [DeTomaso] speedo drive
To: ehpantera at yahoo.com, detomaso at realbig.com
Date: Sunday, October 17, 2010, 11:28 PM


In a message dated 10/17/10 12:28:17 PM, ehpantera at yahoo.com writes:


Does anyone know what the size of the nut  that is used to connect the
speedometer right angle drive to the ZF speedo output?


Are you talking about the lock-nut on the right angle adapter, or the
cable nut that connects the cable to the right angle drive? 'Cause if
it's the last, there were two different sized cables and attendent
cable-nuts, depending on which brand of drive you have. These cables do
not mix 'n match because the nut on the speedo end is the same as that
on the drive. I've never seen a cable that adapted the two possible nut
sizes. Cheers- J Deryke 



_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso
.



<P><p><font face="Arial, Helvetica, sans-serif" size="2" style="font-size:13.5px">_______________________________________________________________<BR>Hitta kärleken med hjälp av vårt matchningstest - <a href="http://spray.matchaffinity.se/?mtcmk=614114">Klicka här!</a></font>