[DeTomaso] speedo drive

[JDeRyke at aol.com]

In a message dated 10/17/10 12:28:17 PM, ehpantera at yahoo.com writes:

> Does anyone know what the size of the nut  that is used to connect the 
> speedometer right angle drive to the ZF speedo output?
> 

Are you talking about the lock-nut on the right angle adapter, or the cable 
nut that connects the cable to the right angle drive? 'Cause if it's the 
last, there were two different sized cables and attendent cable-nuts, 
depending on which brand of drive you have. These cables do not mix 'n match because 
the nut on the speedo end is the same as that on the drive. I've never seen 
a cable that adapted the two possible nut sizes. Cheers- J Deryke