[DeTomaso] changing oil pan gasket
JDeRyke at aol.com
JDeRyke at aol.com
Thu Oct 7 04:16:11 EDT 2010
In a message dated 10/6/10 10:10:57 PM, boyd411 at gmail.com writes:
> On a 1973 L with a Cleveland Engine is it possible to drop the pan
> without lifting the motor ?
>
Only if the under-engine crossmember AND the e-brake bracket have been
upgraded to removeable assemblies. The pan must drop about 6", then move forward
about 4" and this is impossible if the crossmember is still welded in
between the frame rails. In 1975, DeTomaso added removeable units to the factory
catalogue and many Panteras have been so upgraded. '80-up Panteras had them
stock. This also works with fully baffled Aviaid pans. Cutting the old
crossmember out & replacing it with a removeable assembly is a heckuvajob with
the engine & ZF in place but it CAN be done. Then the next time you need to
drop the pan, its simple. Good luck, Boyd- J Deryke
More information about the DeTomaso
mailing list