[DeTomaso] leak question-non pantera

[Jerry R Knotts]

I have had luck using a soldering iron and cut strips from plastic milk 
jugs.  Just sort of run the plastic strips into the crack or void as if you 
are TIG welding with the soldering iron.

Good luck.
jerry
----- Original Message ----- 
From: "Panteratime" <panteratime at aol.com>
To: <detomaso at realbig.com>
Sent: Tuesday, November 09, 2010 5:18 PM
Subject: [DeTomaso] leak question-non pantera


>
> Folks,
> I have a 1991 corvette C4 with a surge tank leak.  The tank seems to be 
> brass with a plastic outer shell.  There is a small leak at the overflow 
> hose connection.  The leak is just where the plastic shell ends so the 
> leak may be alittle lower under the plastic shell also--
> Question--what epoxy can I use to try and plug the small seepage?  It is 
> under pressure.  JB Weld?
> Worse case a replacement tank is like $75.  I'd like to try and repair it 
> first-Thanks
>
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>