[DeTomaso] Houston, we have ignition!
MikeLDrew at aol.com
MikeLDrew at aol.com
Thu May 27 14:51:32 EDT 2010
In a message dated 5/27/10 10 42 41, davel at emspace.com writes:
> Mike
> What was your cam grind?
>
> I just translated Dan's run for me into a pair of Bullet lobe specs and
> a 110 LSA.
> With your great results, I'm wondering if I can see the similarity and
> differnce having 50 less c.i.
>
Here's what Dan wrote about it:
====
The resulting cam is a hydraulic roller with
specs:
236/240 degrees @ 0.050" (291/297 deg adv), 0.616"/0.596" lift, 108 LSA
using Bullet hydraulic roller lobes HR291/356 (intake) and HR297/344
(exhaust):
Master Adv .050 .200 Lobe 1.73:1 Lash Type
HR291/356 291 236 156 .3560 .6159 .000 CRA
HR297/344 297 240 156 .3443 .5956 .000 CRA
======
More information about the DeTomaso
mailing list