[DeTomaso] Galled stainless fasteners
Dave Londry
davel at emspace.com
Wed May 26 02:20:30 EDT 2010
Say Charles,
Aren't you the perpetual optimist?
What happened?
dave
Charles Engles wrote:
> Dear Dave,
>
>
> This sounds remarkably like Tim Tytle's experience. He had
> fancy aluminum pulleys secured with pretty stainless bolts. Unfortunately,
> the bolts holding the crank pulley on the harmonic balancer were improperly
> installed, resulting in the steel bolts coming a bit loose and turning the
> holes in the aluminum pulley into slots. When the problem was finally
> found, only one or two of the galled stainless bolts could be removed.
> Ultimately, the balancer had to be removed and even with the pulley and
> balancer and galled bolts on the work bench one bolt couldn't be removed.
> New pulley. New balancer. Normal grade 8 bolts. No problems now.
>
> It appears that you may have a real headache on your hands.
>
>
More information about the DeTomaso
mailing list