[DeTomaso] Hydraulic lifter pressure hole location

JDeRyke at aol.com JDeRyke at aol.com
Tue May 25 00:33:53 EDT 2010


Dunno the answer to your question but it's only significant with lifters 
that don't have the large recessed ring ground around around the lifter oil 
feed hole. FWIW, I measured a stock 351-C lifter boss at 1.52" high, and got a 
friend to measure his roller-lifter 5.0 L lifter boss at 1.60". Cheers- J 
DeRyke



More information about the DeTomaso mailing list