[DeTomaso] Reduce Weight or Stiffen Chassis?
John Taphorn
jtaphorn at kingwoodcable.com
Mon May 24 19:52:15 EDT 2010
Art
My vote is NOT to eliminate the gills. They are a main design element of
the car IMHO.
JT
----- Original Message -----
From: "Art Stephens" <artstephens at verizon.net>
To: <detomaso at realbig.com>
Sent: Monday, May 24, 2010 6:40 PM
Subject: [DeTomaso] Reduce Weight or Stiffen Chassis?
> I am eliminating the fake vents behind the rear quarter windows. The
> area will be covered with 18 gauge sheet metal that will be welded in. My
> question is how to fill the holes that the studs pass thru holding on the
> vents? I want to fill the holes to keep water out of the soon to be
> enclosed area. (I will have a drain hole at the bottom of the area). My
> car does not have the side gas filler. So I can either fill the four
> holes with metal discs, welded in, or I can open up the gas filler hole
> and then cover all five holes with plastic plugs glued in. Filling the
> holes with metal should theoretically make the car stiffer, using the
> plastic plugs will make it marginally lighter. So what is the best
> solution?
>
> Art
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list