[DeTomaso] What's a good price for a cleveland motor?

[bill gaino]

I bought a complete 2v motor not running for 250$  I also bought a set of bare quench heads for 400$ I thought both were fair deals. Bill 1362
-----Original Message-----
>From: John Garcia <jpgstangs at aol.com>
>Sent: May 18, 2010 8:38 AM
>To: detomaso at realbig.com
>Subject: [DeTomaso] What's a good price for a cleveland motor?
>
>All:
>
>Have a chance to buy a 71 cleveland 2 bolt long block--comes with 70 4V
>quench heads
>"Low miles " with TRW forged pistons, reconditioned rods & crank. Comp
>hydraulic cams & timing chain.
>Bored 0.030 and willing to let me bring it to a machinist to check it
>out.
>
>If it checks out OK, what would be a good price for the just the heads
>only.
>How much for the heads and shortblock?
>BTW, heads are complete, no cracks, all factory & need freshened with a
>valve job.
>
>
>I value your collective input.
>
>Thanks in advance,
>John G.
>
>_______________________________________________
>
>Detomaso Forum Managed by POCA
>
>Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
>DeTomaso mailing list
>DeTomaso at list.realbig.com
>http://list.realbig.com/mailman/listinfo/detomaso


If you want it SLICK.. bring it to SLICKUM Paint Shop www.slickpaint.com