[DeTomaso] Rotors/Turn signal switch

[boyd casey]

I am in the process of replacing my stock brakes with brembos from a 911. It
is my understanding that it is neccesary to move up to 17" wheels (minimum),
I believe you also need an adapter to mount the brembo caliper.
Boyd

On Sat, May 15, 2010 at 2:04 AM, <JDeRyke at aol.com> wrote:

> Fred, the front rotors can, if you're lucky, be replaced cheaply with
> ventillated rotors from a '67 Mustang and will bolt onto Panteras with no
> alterations (per an article in the Oct '08 Newsletter). But it seems that
> there are
> "several" 'different 67 Mustang rotors being sold today, and only one
> variation actually works. That is the 'lucky' part. This change is not
> possible
> for rear rotors.
> Another option is the converted Porsche 911 Brembo rotors with an aluminum
> 'hat' adapter sold by PPC-Reno. These are more expensive but will fit both
> front and rear uprights. No caliper changes are needed and both ends work
> well for street and light track use.
> A 3rd option is polling someone who's done the above changeovers and has
> stockers available cheap. Shipping the 50 or so lbs of iron to Michigan
> would
> likely be your biggest expense. Good luck- J DeRyke
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>