[DeTomaso] A/C Conversion
JDeRyke at aol.com
JDeRyke at aol.com
Fri May 7 01:08:13 EDT 2010
In a message dated 5/6/10 7:25:23 PM, ncpantera at bellsouth.net writes:
> I am looking into relocating the A/C condenser to the front of the car.
> I was on Hall's website and they listed a 45degree radiator for this
> conversion. Is it possible to do the conversion without the 45 degree radiator?
> Where would you run the lines from the engine bay to the front of the
> car? Any help is much appreciated!!
>
What they likely mean here is, you slant the radiator at a 45 degree angle
with offset brackets. A stock radiator will fit fine but a better radiator
won't let the car overheat in traffic with the AC on-full. Stock length
lines, pulled forward, also fit OK, but most people upgrade the system to less
leaky barrier hoses and a brand new dryer, located where one can see the sight
glass, when doing this. Talk to a tech line person at Hall, Precision
Proformance or Wilkinson; dozens of people have done this conversion and while it
isn't simple and you won't get 100% directions free off the web, its quite
possible with mostly-stock parts. Good luck- J Deryke
More information about the DeTomaso
mailing list