[DeTomaso] Question about modifying ZF gearing for high performanceengine.
Mad Dog Antenucci
teampantera at yahoo.com
Fri Mar 12 22:10:10 EST 2010
I have to agree except I'd do the taller 5th.
Mad Dawg Antenucci
Team Pantera Racing
The 1st & still the only vintage race team in open road racing
www.teampanteraracing.com
________________________________
From: Will Demelo <wdemelo at cogeco.ca>
To: detomaso at realbig.com
Sent: Fri, March 12, 2010 1:44:04 PM
Subject: Re: [DeTomaso] Question about modifying ZF gearing for high performanceengine.
I have the 3:77 R&P and taller 5th gear. I wouldn't do both again. I would
be happy with the 3:77s alone as the revs in 5th are a tad low at highway
cruising speed. I absolutely love the taller gearing on the street running
through the gears.
Will
--------------------------------------------------
From: "boyd casey" <boyd411 at gmail.com>
Sent: Friday, March 12, 2010 4:25 PM
To: "De Tomaso List" <detomaso at realbig.com>
Subject: [DeTomaso] Question about modifying ZF gearing for high
performanceengine.
> I was wondering when one repowers their Pantera with an engine that
> generates allot more Tourque and Horsepower as well as possibly higher
> revs
> and you goal is higher top speed as well as faster acceleration do people
> usually only change the pinion gear to change the final gear ratio or do
> they also change the gears1st thru 5 or just one or some of them? From
> looking at the calculator on the RBT transmission web sight, it seems like
> you can accomplish the end result of raising your top speed available with
> the higher horsepower of of a more powerfull engine. To get the optimum
> gearing at every gear you could change the gears and the pinion gear but
> the
> cost would be very substanntial.The gear sets for 2nd, 3rd, 4th, and 5th
> are $1068.75 apiece. That's $4275.00 for 2nd thru 5th ( plus labor) The
> ring
> and pinion set is $2801.25 (plus labor) Thats $7076.25 just for parts to
> change the gears and ring and pinion set. So my question is what have
> other
> people done when they made engine mods that produced large horsepower
> increases and possibly increased revs acheive the desiredgearing to
> provide
> the right gear ratios to provide both reasonable accelleration as well as
> top speed. (above the 168 mph limatation of the stock set up at 6800 rpm).
>
> Boyd
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
_______________________________________________
Detomaso Forum Managed by POCA
Archive Search Engine Now Available at http://www.realbig.com/detomaso/
DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list