[DeTomaso] ZF ring gear bolt head size ?

[B Hower]

Thank you for the information.
Bud 3400

--- On Sun, 3/7/10, Orville <Orville at Rubyglass.com> wrote:


From: Orville <Orville at Rubyglass.com>
Subject: Re: [DeTomaso] ZF ring gear bolt head size ?
To: "'B Hower'" <b.hower3400 at yahoo.com>, detomaso at realbig.com
Date: Sunday, March 7, 2010, 4:39 PM


Bill,
The ones that came out of my ZF had a 15 mm head. You will need 2 wrenches
of that size, one to remove the bolt and one to hold another bolt to keep
the ring gear from turning. The replacement bolts which had been drilled for
the safety wire were 22 mm 12 point bolts.

Orville 9469

-----Original Message-----
From: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com] On
Behalf Of B Hower
Sent: Sunday, March 07, 2010 10:10 AM
To: detomaso at realbig.com
Subject: [DeTomaso] ZF ring gear bolt head size ?

I need to do a safety wire upgrade to the ZF. What size wrench is used to
remove OEM ring gear bolts ?
 
Bud 3400


_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso