[DeTomaso] U-joint fitment
Thomas Tornblom
Thomas.Tornblom at hax.se
Tue Jun 15 01:36:15 EDT 2010
2010-06-15 01:31, Justin Greisberg skrev:
>
> The "correct" u joints I received from the vendor of course has snap rings that were way too thick, and i got to spend hours grinding them down. But the u joints were too long by about 1/16 of an inch in one direction, which made snap ring seating difficult. I am worried the rings will pop out when I drive it. I just hope I notice before the u joint lets go. Definitely not one of the better vendor experiences, especially since I called around and paid this guy extra for the "correct ujoints"
Are you saying that the U-joints were not symmerical?
The original U-joints have the same dimensions on all legs. Or are you
saying that one of the legs is too long? That would happen if one of the
needles drops to the bottom of the cup during assembly.
Thomas
More information about the DeTomaso
mailing list