[DeTomaso] Laminova Crown Victoria police Interceptor oil to wateroil cooler.

boyd casey boyd411 at gmail.com
Tue Jun 1 21:23:56 EDT 2010


Do they make hoses that are suitable for oil lines that are longer that are
already equipped with an aeroquip fitting?
Boyd

On Tue, Jun 1, 2010 at 9:17 PM, <jgkrenton at comcast.net> wrote:

>  The Ford fitting is in fact a Aeroquip type fitting, it comes right apart
> like any aeroquip fitting and you can fit a new aeroquip type hose into the
> original Ford fitting.  Which is a pretty cool rotating fitting. Well worth
> saving!
>
>
>
> FYI
>
>
>
> Jeff 2456
> Message -----
>
> From: "boyd casey" <boyd411 at gmail.com>
> To: "Tomas Gunnarsson" <guson at home.se>
> Cc: "De Tomaso List" <detomaso at realbig.com>
> Sent: Tuesday, June 1, 2010 11:47:44 AM GMT -08:00 US/Canada Pacific
> Subject: Re: [DeTomaso] Laminova Crown Victoria police Interceptor oil to
> wateroil cooler.
>
>
> That was my basic concern(using the Ford fittings, and adapting new oil
> lines to the Ford fittings at the Laminova end , and fabricating braided
> stainless lines and A&N fittings to attach the oil lines to either a sand
> which plate or the remote filter set up I bought. Thanks for your feed
> back.
> Boyd
>
> On Tue, Jun 1, 2010 at 1:39 PM, Tomas Gunnarsson <guson at home.se> wrote:
>
> > Boyd,
> >
> > I used the Ford fittings but not the oil lines. The simple reason is that
> > they are way too short and the Ford fitting doesn't fit normal sandwich
> > adapters anyway. I cut off the sleeves around the Ford fittings and had
> > them
> > installed on my custom length oil lines instead. At the adapter end I had
> > non-swiveling threaded fittings crimped on.
> >
> > Tomas
> >
> > -----Original Message-----
> > From: detomaso-bounces at realbig.com
> > [mailto:detomaso-bounces at realbig.com]On Behalf Of boyd casey
> > Sent: den 1 juni 2010 18:44
> > To: De Tomaso List
> > Subject: [DeTomaso] Villanova Crown Victoria police Interceptor oil to
> > wateroil cooler.
> >
> >
> > Has anyone used the Villanova oil to water oil cooler on their Pantera
> > using
> > the stock Ford oil line fittings to the Villanova? I have heard of people
> > welding the old openings shut and re-drilling and taping for new oil
> lines
> > and various other solutions. I purchased the stock oil lines and fittings
> > that attach the oil lines to the Villanova  and to the engine or oil
> filter
> > side. Is there any reason that I shouldn't use theses original oil lines
> > (Brand new in the box) to connect the lines to the cooler? I was thinking
> > of
> > using the original design to attach the oil lines to the cooler and
> > fabricating a connection to attach the other end of the lines to  my
> > sandwich plate or my remote filter set up that I purchased and never set
> > up.
> > Any advice or the benefit of any ones experience would be appreciated.
> > Boyd
> > _______________________________________________
> >
> > Detomaso Forum Managed by POCA
> >
> > Archive Search Engine Now Available at http://www.realbig.com/detomaso/
> >
> > DeTomaso mailing list
> > DeTomaso at list.realbig.com
> > http://list.realbig.com/mailman/listinfo/detomaso
> >
> > _______________________________________________
> >
> > Detomaso Forum Managed by POCA
> >
> > Archive Search Engine Now Available at http://www.realbig.com/detomaso/
> >
> > DeTomaso mailing list
> > DeTomaso at list.realbig.com
> > http://list.realbig.com/mailman/listinfo/detomaso
> >
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>
>



More information about the DeTomaso mailing list