[DeTomaso] Laminova Crown Victoria police Interceptor oil to wateroil cooler.

[jgkrenton at comcast.net]

The Ford fitting is in fact a Aeroquip type fitting, it comes right apart like any aeroquip fitting and you can fit a new aeroquip type hose into the original Ford fitting.  Which is a pretty cool rotating fitting. Well worth saving! 



FYI 



Jeff 2456 
Message ----- 
From: "boyd casey" <boyd411 at gmail.com> 
To: "Tomas Gunnarsson" <guson at home.se> 
Cc: "De Tomaso List" <detomaso at realbig.com> 
Sent: Tuesday, June 1, 2010 11:47:44 AM GMT -08:00 US/Canada Pacific 
Subject: Re: [DeTomaso] Laminova Crown Victoria police Interceptor oil to wateroil cooler. 

That was my basic concern(using the Ford fittings, and adapting new oil 
lines to the Ford fittings at the Laminova end , and fabricating braided 
stainless lines and A&N fittings to attach the oil lines to either a sand 
which plate or the remote filter set up I bought. Thanks for your feed back. 
Boyd 

On Tue, Jun 1, 2010 at 1:39 PM, Tomas Gunnarsson <guson at home.se> wrote: 

> Boyd, 
> 
> I used the Ford fittings but not the oil lines. The simple reason is that 
> they are way too short and the Ford fitting doesn't fit normal sandwich 
> adapters anyway. I cut off the sleeves around the Ford fittings and had 
> them 
> installed on my custom length oil lines instead. At the adapter end I had 
> non-swiveling threaded fittings crimped on. 
> 
> Tomas 
> 
> -----Original Message----- 
> From: detomaso-bounces at realbig.com 
> [mailto:detomaso-bounces at realbig.com]On Behalf Of boyd casey 
> Sent: den 1 juni 2010 18:44 
> To: De Tomaso List 
> Subject: [DeTomaso] Villanova Crown Victoria police Interceptor oil to 
> wateroil cooler. 
> 
> 
> Has anyone used the Villanova oil to water oil cooler on their Pantera 
> using 
> the stock Ford oil line fittings to the Villanova? I have heard of people 
> welding the old openings shut and re-drilling and taping for new oil lines 
> and various other solutions. I purchased the stock oil lines and fittings 
> that attach the oil lines to the Villanova  and to the engine or oil filter 
> side. Is there any reason that I shouldn't use theses original oil lines 
> (Brand new in the box) to connect the lines to the cooler? I was thinking 
> of 
> using the original design to attach the oil lines to the cooler and 
> fabricating a connection to attach the other end of the lines to  my 
> sandwich plate or my remote filter set up that I purchased and never set 
> up. 
> Any advice or the benefit of any ones experience would be appreciated. 
> Boyd 
> _______________________________________________ 
> 
> Detomaso Forum Managed by POCA 
> 
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/ 
> 
> DeTomaso mailing list 
> DeTomaso at list.realbig.com 
> http://list.realbig.com/mailman/listinfo/detomaso 
> 
> _______________________________________________ 
> 
> Detomaso Forum Managed by POCA 
> 
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/ 
> 
> DeTomaso mailing list 
> DeTomaso at list.realbig.com 
> http://list.realbig.com/mailman/listinfo/detomaso 
> 
_______________________________________________ 

Detomaso Forum Managed by POCA 

Archive Search Engine Now Available at http://www.realbig.com/detomaso/ 

DeTomaso mailing list 
DeTomaso at list.realbig.com 
http://list.realbig.com/mailman/listinfo/detomaso