[DeTomaso] lower support shaft
SOBill at aol.com
SOBill at aol.com
Sun Jul 18 19:12:39 EDT 2010
tipo874a,
The mystery deepens.
I have two recently purchased lower shafts from MAP. The shafts are
threaded 5/8-18.
5/8 = 0.625 inches
9/16 = .5625 inches
14mm = 0.551 inches
Neither 14mm x 2.0 nor 14mm x 1.5 nuts will thread on a 9/16-12 or 9/16-18
bolt by hand.
A 5/8 bolt will go over a 14mm bolt without threading.
Have fun now,
SOBill Taylor
sobill at aol.com
More information about the DeTomaso
mailing list