[DeTomaso] Sparkplugs

Dave Londry davel at emspace.com
Tue Jul 6 14:07:41 EDT 2010


Henrik,
It coudn't hurt to have an A/F check on the carb,
but isn't the NGK BCP 6ES fairly cold for normal street driving?
(and would show that way with a non msd ignition)
dave

Henrik Svensson wrote:
> Hi
>
> I would say close to normal with a slight dry failure. After 4-5 hours of normal driving it's getting hard to start. Cleaning the plugs make it fire instantly.  
>
> Sounds like I have to move my focus from the plugs and start looking at the carb...
>
> /Henrik
>
>
> -----Ursprungligt meddelande-----
> Från: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com] För pantdino at aol.com
> Skickat: den 5 juli 2010 21:07
> Till: detomaso at realbig.com
> Ämne: Re: [DeTomaso] Sparkplugs
>
>
>
>
>
>
> Henrik, 
> How do your plugs look compared to the photos on the page: ?
>
> http://www.ngksparkplugs.com/tech_support/spark_plugs/faqs/faqread.asp?mode=nml
>
>
> How long (how many miles / km) do the plugs work before you have to change them, and how are you using the car?
>
> If the plugs are having to be replaced soon after installation and you are doing normal driving I would think the mixture is the problem.  
>
>
> Jim
>
>
>
>
>
>
> -----Original Message-----
> From: Asa Jay Laughton <asajay at asajay.com>
> To: detomaso at realbig.com
> Sent: Mon, Jul 5, 2010 9:24 am
> Subject: Re: [DeTomaso] Sparkplugs
>
>
> Here's a good page on "reading" your plugs:
> ttp://www.ngksparkplugs.com/tech_support/spark_plugs/faqs/faqread.asp?mode=nml
> Asa Jay
> Asa Jay Laughton, MSgt, USAFR, Retired
>   Shelley Marie
> pokane, WA
> *****************************
> ttp://www.racingagainstautism.com
> ttp://www.teampanteraracing.com
>
> n 7/5/2010 03:09, Henrik Svensson wrote:
>  Hi
>
>  I'm looking into my starting problem and I have reached the sparkplugs.
>
>  I actually have no clue what plugs to use so I'll send a general
>  question here.
>
>  I have a 393 stroker with AFD 4v heads and MDS ignition.
>
>  The plugs I use today is NGK BCP 6ES.
>
>  When the plugs are new the engine fires without problem. But after a
>  while the engine gets harder to fire up.
>
>  The plugs does look ok to me when removing them, just a very little
>  sooty but not as much that is should give me problem when firing the
>  engine?!?
>
>  Any recommendations regarding Heat Range or electrode gap?
>
>  Henrik
>  #1477
>  _______________________________________________
>
>  Detomaso Forum Managed by POCA
>
>  Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
>  DeTomaso mailing list
>  DeTomaso at list.realbig.com
>  http://list.realbig.com/mailman/listinfo/detomaso
>
>
>
>  No virus found in this incoming message.
>  Checked by AVG - www.avg.com
>  Version: 9.0.830 / Virus Database: 271.1.1/2982 - Release Date: 07/04/10 
> 1:35:00
>
>     
> ______________________________________________
> Detomaso Forum Managed by POCA
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
> DeTomaso mailing list
> eTomaso at list.realbig.com
> ttp://list.realbig.com/mailman/listinfo/detomaso
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>
>
>   



More information about the DeTomaso mailing list