[DeTomaso] Dropped Pans?

[Mike Thomas]

Sorta makes you wonder how many could have simply removed the seat rails to
get the drop they needed without cutting the pans.

Mike Thomas

-----Original Message-----
From: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com] On
Behalf Of JDeRyke at aol.com
Sent: Sunday, July 04, 2010 12:23 PM
To: detomaso at realbig.com
Subject: Re: [DeTomaso] Dropped Pans?

The simplest way is, do your seats adjust position fore and aft? If so, the
pans are likely not dropped. Most dropped-pan setups cut the floor under the
seat to make a metal pocket, dropping them 1-2" while not cutting the
stamped crossmembers in the floor. That effectively prevents the seat from
travelling back & forth. Strangely, many cars with dropped pans and thus no
fore and aft adjustment, still keep the adjustment rails which RAISE the
seats about 1" above the floor. FWIW- J DeRyke
_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso