[DeTomaso] Ignition switch - Dropping The Steering Column
Larry Finch
fresnofinches at aol.com
Sat Jan 23 00:12:27 EST 2010
Good advice, Bill.
I might add a good hardware store will have all-thread in 8mm size.
With this, and a few 8mm nuts, you can make your support bolts as
long as you want.
Another method of attack with the housing bolts that have the shear-
off-with-torque heads is to cut a notch in them with a Dremel and a
cut-off wheel. A stubby flat-blade screwdriver should then get the
bolts out, and let them be reused.
Larry
More information about the DeTomaso
mailing list