[DeTomaso] Spark plug wire lengths

[Julian Kift]

The distributor to plug relationship being fixed, in theory any 351C set should do the job, although I have found that the coil to dizzie wire is often too short for our Pantera's in the prepackaged sets.

 

Good luck,

Julian
 
> From: charlesmccall at gmail.com
> To: detomaso at realbig.com
> Date: Fri, 8 Jan 2010 11:41:46 +0100
> Subject: [DeTomaso] Spark plug wire lengths
> 
> I'm going to ask a question that may not be possible to answer.
> 
> 
> 
> Do you need special spark plug wires to be able to use a wire loom? The
> wires on my car are too short to allow them to fit into the loom without
> stressing the wires. They are MSD of some sort. 
> 
> 
> 
> I have a brand new set of Ford Motorsport WR-3926-R (or D7PZ-12259-CR if you
> prefer) spark plug wires. They aren't the pretty red that the MSD wires are,
> but anyone have any idea if they can be installed on a 351C with enough
> slack to fit through the looms easily? The plug cables are here and my
> engine is 8 hours away, which is why I can't check it myself. 
> 
> 
> 
> Thanks!
> 
> 
> 
> Charles McCall
> 
> 1985 DeTomaso Pantera GT5-S #9375
> 
> "Raising Pantera Awareness Across Europe"
> 
> <http://www.poca.com/index.php/gallery/?g2_itemId=2323>
> http://www.poca.com/index.php/gallery/?g2_itemId=2323
> 
> 
> 
> _______________________________________________
> 
> Detomaso Forum Managed by POCA
> 
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
> 
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
 		 	   		  
_________________________________________________________________
Hotmail: Trusted email with Microsoft’s powerful SPAM protection.
http://clk.atdmt.com/GBL/go/196390706/direct/01/