[DeTomaso] Spark plug wire lengths

[michaelsavga at gmail.com]

Depending upon the loom design you may need to buy a universal set and put the ends on yourself.   I bought the accel 300+ set and did that.  Mine are black with a yellow stripe (bought because they were hi po wires and because the car is yellow).  Michael Shortt
------Original Message------
From: Charles McCall
Sender: detomaso-bounces at realbig.com
To: detomaso at realbig.com
Sent: Jan 8, 2010 05:41
Subject: [DeTomaso] Spark plug wire lengths

I'm going to ask a question that may not be possible to answer.

 

Do you need special spark plug wires to be able to use a wire loom? The
wires on my car are too short to allow them to fit into the loom without
stressing the wires. They are MSD of some sort. 

 

I have a brand new set of Ford Motorsport WR-3926-R (or D7PZ-12259-CR if you
prefer) spark plug wires. They aren't the pretty red that the MSD wires are,
but anyone have any idea if they can be installed on a 351C with enough
slack to fit through the looms easily? The plug cables are here and my
engine is 8 hours away, which is why I can't check it myself. 

 

Thanks!

 

Charles McCall

1985 DeTomaso Pantera GT5-S #9375

"Raising Pantera Awareness Across Europe"

 <http://www.poca.com/index.php/gallery/?g2_itemId=2323>
http://www.poca.com/index.php/gallery/?g2_itemId=2323

 

_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso


Sent from my BlackBerry® wireless handheld