[DeTomaso] Cam walk.

[Doug Braun]

I see, very nice indeed.

Doug

-----Original Message-----
From: hemipanter at hemipanter.se [mailto:hemipanter at hemipanter.se]
Sent: Wednesday, January 06, 2010 9:07 AM
To: Doug Braun
Subject: RE: [DeTomaso] Cam walk.


Doug, the cam has no stop at the other end, both directions is stopped by
an identical roller bearing each side of the cam gear, so it is just a 1/2
inch  left of expanding camchaft.
Goran
> Nice work Goran!  With zero end-play might there be a problem with thermal
> expansion?  The cam is quite long compared to the cover so it's expansion
> could cause a bind.
>
> Doug Braun
>
> -----Original Message-----
> From: detomaso-bounces at realbig.com
> [mailto:detomaso-bounces at realbig.com]On Behalf Of
> hemipanter at hemipanter.se
> Sent: Tuesday, January 05, 2010 3:39 PM
> To: detomaso at realbig.com
> Subject: [DeTomaso] Cam walk.
>
>
> Hav not been very much talk about "cam walk" on this board. So, here is a
> few lines about it. www.hemipanter.se klick "Fabrication pictures." Last
> part of it include my latest trix for a fix. I decided to try to modify a
> regular cam chain kit to do the job.
> Goran
>
>
>