[DeTomaso] supercharger questions

wkooiman at earthlink.net wkooiman at earthlink.net
Sun Jan 3 21:53:57 EST 2010 

If it were me (and only if it were me), when it's 21 degrees outside, I'd be planning on moving somewhere where it isn't 21 degrees outside.  But that's just me.


-----Original Message-----
>From: boyd casey <boyd411 at gmail.com>
>Sent: Jan 3, 2010 9:11 PM
>To: Peter Kovacs <peter-kovacs at sbcglobal.net>
>Cc: Ken Green <kenn_green at yahoo.com>, jderyke at aol.com, detomaso at realbig.com
>Subject: Re: [DeTomaso] supercharger questions
>
>I have to agree that there is no reasonable  excuse for 800hp. The one thing
>besides the "cool" factor is that the LS7 (for example) puts out 505 hp
>while providing a stated 28 mpg in the corvette. The titanium guts are as
>close to bullet proof as you can get in a pushrod engine, and you have efi
>designed specifically for the engine as well as coil on cylinder ignition
>and every component matched to work at an optimum level. The engineers at GM
>claim that the engine has to withstand a projected 100,000 miles life
>expectancy in order to pass muster.  I know I could easily get comparable HP
>from a cleveland stroker but there's no chance of the mileage or life
>expectancy. It's just an idea I have been kicking around. As I mentioned
>earlier when it's 21 degrees outside I like to think about what I might plan
>next.
>Boyd
>
>On Sun, Jan 3, 2010 at 8:41 PM, Peter Kovacs <peter-kovacs at sbcglobal.net>wrote:
>
>> Ron Demedeiros has a 5.4 in his Pantera and I have a supercharged 4.6
>> stroked to a 5.1 in my 73. The only regret I have is not spending more time
>> driving it. Mild mannered when you treat it that way and wild with your foot
>> in it.
>>
>> *Peter Kovacs*
>> *209 345-6708 *
>> *209 436-2000 fx*
>>
>>
>>  ------------------------------
>> *From:* boyd casey <boyd411 at gmail.com>
>> *To:* Ken Green <kenn_green at yahoo.com>
>> *Cc:* jderyke at aol.com; detomaso at realbig.com
>> *Sent:* Sun, January 3, 2010 5:27:02 PM
>>
>> *Subject:* Re: [DeTomaso] supercharger questions
>>
>> Ken,
>> I have spoken to Chris about his modular engine. I actually would prefer
>> the
>> Ford modular engine . I think the 4 vales per cylinder and the DOHC seem
>> much more appropriate for an Italian exotic. The only problem is the engine
>> costs around twice as much as an LS 3 getting more horsepower or an LS7
>> with
>> the titanium  guts and no forced induction getting 505 HP and 28 mpg. You
>> can buy an LS7 for $13k and change.
>> Hugh
>>
>> On Sun, Jan 3, 2010 at 7:47 PM, Ken Green <kenn_green at yahoo.com> wrote:
>>
>> > Boyd,
>> >
>> >    The ZF may be a bigger issue than the engine, and more expensive to
>> > replace.  It may be good to not go above 800 HP?
>> >
>> >    I talked to Jim Bell (Kenne Belll Superchargers) a while back and he
>> > said they get an easy 800 HP in one of the current  Mustangs (I think the
>> > GT500???)  and it's a very reliable street engine.  He thought it would
>> work
>> > well in a Pantera.  Jim seems to have some pretty cool technology in his
>> > twin screw superchargers and he seems to have a lot of real world
>> > experience.
>> >
>> >    Chris Difani would have thoughts on this.
>> >
>> > Ken
>> >
>> > --- On *Sun, 1/3/10, boyd casey <boyd411 at gmail.com>* wrote:
>> >
>> >
>> > From: boyd casey <boyd411 at gmail.com>
>> > Subject: Re: [DeTomaso] supercharger questions
>> > To: jderyke at aol.com
>> > Cc: detomaso at realbig.com
>> > Date: Sunday, January 3, 2010, 3:25 PM
>> >
>> > Thanks for your quick and informative reply. I should have mentioned I am
>> > not planning on supercharging my 37 year old Cleveland. I have been
>> > thinking
>> > about what I would  do ( or will do  when my Cleveland gives up the
>> fight.
>> > I
>> > have no indication that this is an impending issue but one never knows.
>> > It's
>> > like a stroke or a Heart attack, if you knew it was coming you would
>> > probably have done something differently. I know supercharging my old
>> > Cleveland in any form would make the possibility of a major failure a
>> > certainty instead of a possibility. I know many will think it sacrilege
>> but
>> > I have been researching  a supercharged LS3. Based on my calculations I
>> can
>> > get an engine with much more horsepower and almost all the technological
>> > advantageous of the LS7 or LS9
>> > including the efi specifically designed for the application and the coil
>> on
>> > cylinder ignition as well as the advantageous of the 6 bolt main ,
>> aluminum
>> > block and keep the price around that of the LS7 with 200 or more
>> horsepower
>> > then the LS7  . According to the horsepower estimates the LS3  376/480
>> with
>> > 6 psi would generate  675hp at the flywheel and 540 Hp at the rear
>> wheels.
>> > With 8 psi you would be looking at  756 hp and 605 hp at the rear wheels.
>> > With a Whipple twin screw supercharger and 3 core intercooler you can
>> > obtain
>> > 25 psi . If you are prepared to push the envelope and the idea of
>> > rebuilding
>> > your engine on a regular basis does not bother you 20 lbs psi would
>> produce
>> > an estimated 1015 hp at the flywheel and 812HP at the rear wheels. You
>> can
>> > buy an LS 376/480 for $6399 directly from a GM dealer (the retail price
>> is
>> > $9138). The LS7 retails around $19,000 and you can buy one for around
>> > $13,000 and the LS9 which is already supercharged , comes with a dry sump
>> > and drive by wire controls will run you around $19,000. In all of these
>> > examples you still need to buy an ecu and harness and with the LS3 you
>> > would
>> > need to spend between $6000 and $7000 for a complete supercharger setup
>> > with
>> > intercooler. You would also need a new bell housing with any LS based
>> > engine
>> > and as you know and with any engine that provides a big increase in
>> > horsepower you  will need to regear your ZF if you wanted to convert all
>> > the
>> > extra horse power into a higher top speed and a quicker 0-60 ( like 0-60
>> in
>> > 3 secs in first gear). I like to think about the various re powering
>> > possibilities during the winter months while I can't drive the Pantera.
>> > When
>> > the day comes that I have to take action I will be prepared to make a
>> > decision having already done the research. I have been spending my time
>> and
>> > money upgrading my brakes and suspension. I want to make sure I can stop
>> > faster before I worry about  going faster!.
>> > Boyd
>> >
>> > On Sun, Jan 3, 2010 at 3:29 PM, <jderyke at aol.com<
>> http://us.mc308.mail.yahoo.com/mc/compose?to=jderyke@aol.com>>
>> > wrote:
>> >
>> > > In a message dated 1/3/10 9:57:57 AM, boyd411 at gmail.com<
>> http://us.mc308.mail.yahoo.com/mc/compose?to=boyd411@gmail.com>writes:
>>
>> > >
>> > > Do you think a Whipple twin screw supercharger with an intercooler is a
>> > > better choice or a Centrifugal supercharger ( like a Paxton or a
>> Vortech
>> > )
>> > >
>> > > Depends on the engine and what you plan to do with it. First, I would
>> NOT
>> > > supercharge any 351-C that's been overbored unless you have a
>> sonic-test
>> > in
>> > > hand that shows over 0.100" cylinder wall thickness everywhere AFTER
>> such
>> > > boring. Thin walls flex with combustion pressures, blown engine
>> > combustion
>> > > pressures are significantly higher and cast iron doesn't flex very
>> long.
>> > So
>> > > I'd suggest a different engine. Second, actually driving most blowers
>> in
>> > a
>> > > Pantera is difficult due to not enough space for a proper width drive
>> > belt,
>> > > unless the engine is shifted backward. Shift the engine first before
>> > buying
>> > > any blower. Next, most blower kits are made for drag racing and don't
>> > work
>> > > well for long-haul use. Depends on your plans for the car. Budget about
>> > > $7000 for such a kit and have an extra block or two around;
>> blower-savvy
>> > > engine bulders say your experience with superchargers is in direct
>> > > proportion to the number of ruined blocks out back...All it takes is
>> one
>> > > (1.0) backfire to take out most systems so a really good ignition and
>> > fuel
>> > > system is much more important than higher boost. There's a reason most
>> > > factory systems only push about 5-8 psi. Finally, whipplechargers are
>> > well
>> > > known for pushing more air more efficiently than other designs, without
>> > the
>> > > lag built into centrifugal blowers. A well-designed intercooler (few
>> > really
>> > > are, by the way) is worth a few more psi in boost at the cost of extra
>> > wt,
>> > > complication in mounting in a Pantera and $$$, plus more damage if the
>> > > engine pops. You can't practically run an air-cooled intercooler with
>> > most
>> > > mid-engined configurations so a watercooled assembly makes more sense.
>> > Good
>> > > luck- J DeRyke (who owns two factory-blown vehicles- one intercooled.
>> Fun
>> > > for mountain driving.)
>> > _______________________________________________
>> >
>> > Detomaso Forum Managed by POCA
>> >
>> > Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>> >
>> > DeTomaso mailing list
>> > DeTomaso at list.realbig.com<
>> http://us.mc308.mail.yahoo.com/mc/compose?to=DeTomaso@list.realbig.com>
>>
>> > http://list.realbig.com/mailman/listinfo/detomaso
>> >
>> >
>> _______________________________________________
>>
>> Detomaso Forum Managed by POCA
>>
>> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>>
>> DeTomaso mailing list
>> DeTomaso at list.realbig.com
>> http://list.realbig.com/mailman/listinfo/detomaso
>>
>_______________________________________________
>
>Detomaso Forum Managed by POCA
>
>Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
>DeTomaso mailing list
>DeTomaso at list.realbig.com
>http://list.realbig.com/mailman/listinfo/detomaso

More information about the DeTomaso mailing list