[DeTomaso] ZF To Chassis Ground Necessary?
Will Kooiman
wkooiman at earthlink.net
Fri Feb 26 23:10:40 EST 2010
I removed the ground and the stud.
I welded another stud to the frame closer to the starter (hard to describe
the exact location). I was going to run a cable to the starter stud, but I
ran it to the front of the block instead. It worked great, plus it cleaned
up the aesthetics of the rear of the zf.
-----Original Message-----
From: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com] On
Behalf Of Art Stephens
Sent: Friday, February 26, 2010 3:07 PM
To: detomaso at realbig.com
Subject: [DeTomaso] ZF To Chassis Ground Necessary?
I can't see a good reason for the ZF to chassis ground. Wouldn't it have
been better to run the ground from a location nearer to the starter and then
to the chassis? I would like to eliminate the ZF to chassis ground, what
do you guys think?
Art
_______________________________________________
Detomaso Forum Managed by POCA
Archive Search Engine Now Available at http://www.realbig.com/detomaso/
DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list