[DeTomaso] Electricity Update on Pantera

[SOBill at aol.com]

Bosse,
 
IMHO, the first mod that should be made is the installation of the  Pantera 
Electronics Ignition switch bypass 
(_http://www.pantera-electronics.com/ingswtch.html_ (http://www.pantera-electronics.com/ingswtch.html) )  which 
takes basically all the loads off the ignition switch and puts them on  relays. 
The installation is dead simple as it replaces the existing  (troublesome) 
ignition switch junction strip.
 
The second mod is the installation of the Pantera Electronics ATO  fuse 
panel (_http://www.pantera-electronics.com/ato.html_ 
(http://www.pantera-electronics.com/ato.html) ).  This installation replaces the existing 
(troublesome) fuse panel with  moder ATO style fuses, has blown fuse indicators, and has 
a built-in  voltage indicator The ATO panel is a wire-per-wire and  
terminal-per-terminal interchange for the OEM fuse panel and preserves the  
applicability of the existing Pantera wiring diagrams.
 
The design and construction of these items is a work of  electrical art. 
They are fabricated from high quality parts to a very high  standard of 
workmanship.
 
Have fun,
 
SOBill  Taylor
sobill at aol.com  

 
In a message dated 2/24/2010 2:31:00 P.M. Pacific Standard Time,  
larsen.bosse at gmail.com writes:

Hi  guys,

Which electricity loads should have relays?
These are well  needed...
Hi and low light.
Radiator relay.

But...
Heater fan  low?

Heater fan hi?

Ignition Switch ACC?

Ignition Switch  RUN?

Ignition Switch Start?

Is it any more?



Where  have you mounted the relays?
Can you send photos on yours relay  mounting?  larsen.bosse at gmail.com


Should I replace some, and  make bigger ground cables?


Thanks Bosse

Pantera  -74
_______________________________________________

Detomaso Forum  Managed by POCA

Archive Search Engine Now Available at  http://www.realbig.com/detomaso/

DeTomaso mailing  list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso