[DeTomaso] 351 and 302 Distributer Compatibility
MikeLDrew at aol.com
MikeLDrew at aol.com
Sun Feb 21 18:44:50 EST 2010
In a message dated 2/21/10 15 40 32, dnunn at telus.net writes:
> I'm pretty sure Thomas Tornblom can tell you
> exactly what the differences are between the 302 and 351C/W distributors
> because I believe he modified a 302 distributor to work in his fuel
> injected
> 351C. I'm pretty sure there was more to it than changing shafts. I recall
> the 302 housing being slightly smaller in diameter than the 351 housing
> but
> I could be wrong.
>
>
He'll of course weigh in soon enough, but my recollection is that his car
has an Australian 351C which used a Bosch (not Ford) distributor, and the
hole in the block was a different size, i.e. 302-sized instead of normal 351C
size.
Thomas? Am I close?
Mike
More information about the DeTomaso
mailing list