[DeTomaso] Do-it-yourself Seat Track Wheels
MikeLDrew at aol.com
MikeLDrew at aol.com
Mon Dec 20 22:21:39 EST 2010
In a message dated 12/20/10 19 10 48, jskeane6 at gmail.com writes:
> Being pig-headed, I'm going to see if I can make them work by reducing
> the diameter a bit with my meager set of tools. I plan to drill a hole
> through the center, put a bolt though the hole with a nut on it, and use
> the bolt to chuck the assembly into my drill press. Then, I'll reduce
> the diameter with a file and sandpaper.
>
There's a faster way to do that. Chuck the bolt/wheel into your electric
drill. Then go to your bench grinder, turn the grinder one way and the
bolt/wheel assembly the other way.
That's a good way to turn socket head cap bolts into round-head Allen bolts
too!
Mike
More information about the DeTomaso
mailing list