[DeTomaso] Definition of Ins. EE response

[PersoCaddy at aol.com]

Hi Guy's. The measured coil resistance comes from the length of wire used  
in the secondary windings, this is thinner wire with lots of turns. So that 
is  why the readings are lower. A coils electrical impedance both inductive 
and  capacitive is matched to the source that is driving it. Either the 
points as in  an old style or a Capacitor in the new electronic ones. So the 
coils resistance  is a non issue other than to tell you if it is shorted. I 
would as a matter of  choice us only the coil the manufacturer recommends as 
they where designed to  match each other. Pat Orlando 1972 Yellow Pantera S/N  
4011