[DeTomaso] Torque question

[boyd casey]

I'm sorry I should have been more clear. I was asking about fastening the
hat to the rotor ( you answered the question about the lug nut torque.)
Boyd

On Mon, Aug 23, 2010 at 7:29 PM, Julian Kift <julian_kift at hotmail.com>wrote:

>  The hat is held on by the wheel studs isn't it? If inboard then the stud
> splines will hold it fixed against the axle flange and if outboard the wheel
> will keep it it place once mounted and torqued? Make sure the stud splines
> don't protrude beyond the mounting face for the wheel. Did you figure out if
> your wheels are hub centric or not?
>
> IMO 75 ft/lbs for 60 degree taper 12mm x 1.5 lug nuts with min 7 turns of
> thread engagement. Remember to use a star or diagonal torquing pattern.
>
> Julian
>
> > Date: Mon, 23 Aug 2010 16:46:05 -0400
> > From: boyd411 at gmail.com
> > To: detomaso at realbig.com
> > Subject: [DeTomaso] Torque question
>
> >
> > I was pleasantly surprised when my replacement parts arrived today (to
> > repair the damage that occured when I almost lost my wheel on
> Thursday)They
> > were shipped from CA. on Friday via US Priority mail and arrived here in
> NY
> > at around 2:00 PM Great customer Service from German Auto and the US Post
> > office! So I am putting everything back together and I want to make sure
> I
> > do everything right. I bought a new torque wrench today and I would like
> to
> > know what are the correct torque specs to fasten the hat to the rotor? I
> > have also read various different torque specs for the Lug nuts. What is
> the
> > consensus of what the lug nuts should be torqued at?
> > Thanks,
> > Boyd
> > _______________________________________________
> >
> > Detomaso Forum Managed by POCA
> >
> > Archive Search Engine Now Available at http://www.realbig.com/detomaso/
> >
> > DeTomaso mailing list
> > DeTomaso at list.realbig.com
> > http://list.realbig.com/mailman/listinfo/detomaso
>