[DeTomaso] Offset Poly Bushings
robert stewart
rspink2012 at yahoo.com
Tue Aug 17 11:53:39 EDT 2010
I just got a new set from Marino at Pantera East. The front ones come in 4
sizes Thick, Med Thick, Med thin and thin. The instructions clearly show which
goes where.With advice from John Taphorn we tapered the ends of the bushing on a
lathe and then drilled the A arms and installed zerks.
They are on the car and look good but the car is still on stands as other
projects are continuing.
Rob
________________________________
From: "JDeRyke at aol.com" <JDeRyke at aol.com>
To: tborcich at msn.com; detomaso at realbig.com
Sent: Tue, August 17, 2010 1:59:22 AM
Subject: Re: [DeTomaso] Offset Poly Bushings
In a message dated 8/16/10 11:40:12 PM, tborcich at msn.com writes:
> Who sells the offset Poly Bushing for the front suspension? Didn't know
> that was an option for increasing the caster.
>
Gee, most of the vendors sell them including Pantera East- where I got mine
15 years ago I think. The only difference is, there's a thick flange on one
end of each of the 'offset' bushing pairs, which forces the a-arm sideways,
changing the caster. Cheers- J DeRyke
_______________________________________________
Detomaso Forum Managed by POCA
Archive Search Engine Now Available at http://www.realbig.com/detomaso/
DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list