[DeTomaso] Muffler Opinions
MikeLDrew at aol.com
MikeLDrew at aol.com
Fri Aug 6 22:50:07 EDT 2010
In a message dated 8/1/10 17 35 26, jtaphorn at kingwoodcable.com writes:
> I would think it possible to drill the resonators to an acceptable ID.
>
You can't drill a resonator. Resonators have an inside steel piece of
pipe with holes in it, and rings at each end, which fit the ID of the chrome
tip. The only thing you can do is remove and replace the resonator with one
of a larger diameter--or remove it entirely.
Mike
More information about the DeTomaso
mailing list