[DeTomaso] Mayo.
JDeRyke at aol.com
JDeRyke at aol.com
Tue Aug 3 14:04:06 EDT 2010
Incidently, Dave- head gaskets can blow between cylinders and from a
cylinder to a water passage, INSIDE the gasket sections if its a multilayer
gasket. Both these may not leak water outside the block. I just had that occur on
an engine here. Noce the intake & heads w ere pulled, externally there was
no indication of a blow on the gasket but there was enough pressure in the
water system to blow a 2" hose off the water pump. That was the owners first
clue... It took some very careful looking to see what had happened. And it
was all caused by a single loose headbolt. Good luck- J Deryke
More information about the DeTomaso
mailing list